![]() Apply a thin layer slightly larger than the patch. Applying the glue: Using a brush, apply the glue to the already cleaned outside tent fabric.A stuff stack usually consists of the same material as the outer tent, so there are no problems with the coating. Tip: If you don’t have a suitable patch with you on your trip, use the tent’s stuff sack.Cut the patches to size: The repair patch should be large enough so that the patch covers the hole on all sides by approx. ![]() Round and slightly larger holes in PU ( polyurethane)-coated tent fabric are best covered with a suitable patch for a permanent repair. Apply repair adhesive: Then drip a small but sufficient amount of McNett repair glue on the damage and let it dry.Cleaning with an alcohol swab from your first aid kit works well. Clean the area: Before you start patching up a hole, you should always clean and degrease the damaged area.Holes of this type with a diameter of about one centimetre can be mended quite quickly, especially in PU-coated camping and trekking tents. Small, circle-shaped holes in the tent fabric are often caused, for example, by thorns. Mend small holes in the PU coating For small holes in PU-coated tents, just a drop of suitable repair adhesive is sufficient.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |